Unsaturated Polyester Resins
Polimal 144 series
Neutral construction resins, terephthalic, with good processing and strength parameters. Opaque colour, from grey to dark grey.
APPLICATION
Manufacture of resin and mineral moulds, in particular garden figures (garden gnomes).
PRODUCT ADVANTAGES
- Good miscibility and suspensibility of mineral fillers in resin
- High strength parameters (similar to isophthalic resins)
- High heat resistance HDT
- Good processing properties
- Increased chemical resistance
AVAILABLE VERSIONS
- Polimal ® 144-01 P — accelerated
- Polimal ® 144 A — ecological
- Polimal ® 144 B — for resin cartridges
- Polimal ® 144 AWTP — ecological, accelerated, thixotropic, with hardening colour indicator
Polimal 109 AWTP
Medium flexible construction resin, orthophthalic, accelerated. Low styrene emissions and hardening colour indicator system.
APPLICATION
Manual or spray manufacturing based on thermoplastics (PMMA and PMMA/ABS).
PRODUCT ADVANTAGES
- Very good processing properties
- High oversaturability of fibreglass
- Favourable hardening characteristics
- Good strength parameters
Polimal 1090 AWTP
Medium flexible construction resin, orthophthalic, accelerated. Very low styrene emissions and hardening colour indicator system, as well as increased adhesion to acrylic and ABS.
APPLICATION
Manual or spray manufacturing based on thermoplastics (PMMA and PMMA/ABS).
PRODUCT ADVANTAGES
- Very good processing properties
- High oversaturability of fibreglass
- Allows to introduce a large quantity of filler
- Favourable hardening characteristics
- Good strength parameters
Polimal 103
Medium flexible, low viscosity resins with good processing properties
APPLICATION
Manual manufacturing of polyester and glass laminates.
PRODUCT ADVANTAGES
- Good strength parameters
- Relatively low contraction
- Flexibility
- Elasticity
- Relatively high impact strength
Polimal 103 A
Medium flexible, low viscosity resins with good processing properties.
APPLICATION
Manual manufacturing of polyester and glass laminates.
PRODUCT ADVANTAGES
- Good strength parameters
- Relatively low contraction
- Flexibility
- Elasticity
- Relatively high impact strength
Polimal 104 AWTP
Medium flexible resin with increased heat resistance.
APPLICATION
Manual or spray manufacturing of polyester and glass laminates.
PRODUCT ADVANTAGES
- High wettability of fibreglass
- Favourable hardening characteristics
- Hardening colour indicator
- Heat resistance HDT
- Bending and peeling strength
Polimal 104 N-1
Unsaturated polyester resin, orthophthalic, low viscosity, medium reactive.
APPLICATION
Manufacture of fibreglass-strengthened products and resin and mineral composites.
PRODUCT ADVANTAGES
- Non-adhesive surface after hardening
- Allows to introduce a large quantity of filler
- Easier mixing and casting
- Very good strength parameters of hardened resin (heat resistance, hardness)
Polimal 108
Rigid resin, medium reactive. Alternative for a colourless top coat.
APPLICATION
Recommended as a finishing layer of polyester and glass laminate, as well as an ingredient of flooring screeds (along with Polimal 150).
PRODUCT ADVANTAGES
- As the last laminate layer, it ensures a non-adhesive, "dry" surface.
Polimal 109 and other in series
Medium reactive construction resin with high hardness after hardening — dust-dry surface.
APPLICATION
Manual manufacturing of polyester and glass laminates, particularly with large dimensions and rigid.
PRODUCT ADVANTAGES
- Provides dry surface with high hardness
- Relatively low polymerisation contraction
- High product rigidity and hardness
- Allows using resins to manufacture polyester and glass forms
AVAILABLE VERSIONS
- Polimal 109 A – low styrene emissions
- Polimal 109-32 K – lower viscosity
Polimal 143 AWTP-1
APPLICATION
Manual and spray production of laminates used to manufacture sports and tourism equipment, tubs, paddling pools, tanks, etc.
PRODUCT ADVANTAGES
- Very high oversaturability of fibreglass
- Low run-off on vertical walls
- Relatively short gelling time
- Favourable hardening characteristics
Polimal 1059 AWTP
Medium flexible construction resin with increased heat resistance, modified DCPD, accelerated, with promoters. Low styrene emissions, hardening colour indicator system.
APPLICATION
Manual and spray production of polyester and glass laminates used to manufacture sports and tourism floating equipment, etc.
PRODUCT ADVANTAGES
- High wettability of fibreglass
- Favourable hardening characteristics
- Low contraction
- Low styrene emissions
- Colour alteration system
- High heat resistance
Polimal 1094 AWTP-1
Basic medium flexible construction resin, orthophthalic, accelerated, with low styrene emissions and hardening colour indicator system. Lloyd's Register Certificate no. MATS/2782/3.
APPLICATION
Manual and spray production of laminates used to manufacture sports and tourism floating equipment, tubs, paddling pools, tanks etc.
PRODUCT ADVANTAGES
- Very good processing properties
- High oversaturability of fibreglass
- Favourable hardening characteristics
- Good strength parameters
Polimal 104 AWTP
Medium flexible resin with increased heat resistance, orthophthalic, accelerated, thixotropic. Features a hardening colour indicator and reduced styrene emissions.
APPLICATION
Manual or spray manufacturing of polyester and glass laminates.
PRODUCT ADVANTAGES
- High wettability of fibreglass
- Favourable hardening characteristics
- Heat resistance HDT
- Bending and peeling strength
Polimal 120 T
Isophthalic, thixotropic resin with reduced run-off on vertical surfaces.
APPLICATION
Manufacture of products with high strength parameters and high heat and water resistance. May be used to produce polyester and glass laminates.
PRODUCT ADVANTAGES
- High oversaturability of fibreglass
- Increased chemical and heat resistance
- Relatively short gelling time
- Favourable hardening characteristics
Polimal 144 and other in series
Rigid resin with increased heat resistance, medium reactive, neutral, terephthalic.
APPLICATION
Manufacture of polyester and glass laminates and resin and mineral moulds.
PRODUCT ADVANTAGES
- High strength parameters
- Good processing properties
- Increased chemical resistance
- High strength parameters — similar to isophthalic resins
- Colour alteration system
- High heat resistance
AVAILABLE VERSIONS
- Polimal ® 144 A –ecological, LSE
- Polimal® 144-01 – for garden gnome production
- Polimal ® 144 B – for blasting cartridges
- Polimal ® 144 AWTP – ecological, LSE, accelerated, thixotropic, with hardening colour indicator
Polimal 1056 T
Modified resin based on DCPD, rigid, reduced run-off on vertical walls.
APPLICATION
Manual and spray manufacturing of polyester and glass laminates.
PRODUCT ADVANTAGES
- Very good processing properties
- High wettability of fibreglass
- Thick layers of laminate may be made in one go
- Favourable hardening characteristics
- Low contraction
- Low styrene emissions
- High heat resistance HDT
- High hardness
Polimal 1056 AWTP
Rigid modified resin based on DCPD, accelerated, thixotropic. Features a hardening colour indicator and reduced styrene emissions. Winter version.
APPLICATION
Manual and spray manufacturing of polyester and glass laminates.
PRODUCT ADVANTAGES
- High wettability of fibreglass
- Thick layers of laminate may be made in one go
- Favourable hardening characteristics
- Low contraction
- Low styrene emissions
- High heat resistance HDT
Polimal 1057 AWTP
Medium flexible DCPD modified resin with promoters, accelerated, thixotropic. Features a hardening colour indicator and reduced styrene emissions.
APPLICATION
Manual and spray manufacturing of polyester and glass laminates.
PRODUCT ADVANTAGES
- High wettability of fibreglass
- Thick layers of laminate may be made in one go thanks to moderate exotherm
- Favourable hardening characteristics
- Low contraction
- Low styrene emissions
- Colour alteration system
- High heat resistance HDT
Polimal 1075
Orthophthalic resin with increased heat resistance.
APPLICATION
Manufacture of resin and mineral moulds.
PRODUCT ADVANTAGES
- Easier mixing and casting of the mixture
- Very good strength parameters
Polimal VE 2MM and version T
Vinyl-ester resin features the best chemical resistance properties of all resins produced by the CIECH Group.
APPLICATION
Manufacture of products that require high chemical resistance — laminates, forms, polymer concrete and others. Products made of this resin maintain high strength parameters after prolonged exposure to an aggressive environment.
PRODUCT ADVANTAGES
- Good processing properties
- High oversaturability of fibreglass
- After hardening, dry surface is obtained
AVAILABLE VERSIONS
- Polimal VE 2MM T – thixotropic resin
Polimal 1602 APyS
Orthophthalic construction resin, accelerated, with reduced styrene emissions and low run-off on vertical surfaces. Contains fillers and dyes that provide the product with white colour and flammability reducing properties.
APPLICATION
Manufacture of polyester and glass laminates with reduced flammability — e.g. low voltage power boxes.
PRODUCT ADVANTAGES
- Efficiency
- Short gelling time
- Short hardening time
- Low peak temperature
- High heat resistance HDT ᵒC
Polimal 1608 PS
Accelerated construction resin based on DCPD, with reduced flammability and smoke emission. Contains carefully selected fillers that provide the product with flammability reducing properties, while retaining relatively good processing parameters.
APPLICATION
Manufacture of polyester and glass laminates with reduced flammability and smoking — e.g. rolling stock (domestic traffic).
PRODUCT ADVANTAGES
- Moderate viscosity
- Short gelling and hardening time
- Low peak temperature
- Good miscibility
- High heat resistance HDT
Polimal VE 11M
Neutral vinyl-ester resin with reduced flammability. Lloyd's Register Certificate MATS/4379/1.
APPLICATION
Production of laminates with increased requirements regarding both chemical resistance and flammability reduction.
PRODUCT ADVANTAGES
- High oversaturability of fibreglass
- High strength parameters
- Good chemical resistance
- High heat resistance HDT
Polimal 150
Flexible orthophthalic resin, low reactive, high tensile elongation.
APPLICATION
Flexibility additive for rigid, construction resins. Allows increasing flexibility of polyester and glass laminates and obtaining higher impact resistance and higher break elongation.
PRODUCT ADVANTAGES
- High flexibility
- Low polymerisation contraction
Polimal 109-32 PyK
Accelerated orthophthalic resin. The product meets all necessary hygienic requirements — National Institute of Hygiene's approval HK/B/0502/02/2010.
APPLICATION
Manufacture of marble-like products and polyester and glass laminates used in households, construction and other branches of the industry.
PRODUCT ADVANTAGES
- Allows to introduce a large quantity of filler
- Easier mixing and casting
- Very good strength parameters
POLIMAL 109-32 K
Orthophthalic base resin, neutral. The product meets all necessary hygienic requirements — National Institute of Hygiene's approval HK/B/0502/02/2010.
APPLICATION
Manufacture of marble-like products and polyester and glass laminates used in households, construction and other branches of the industry.
PRODUCT ADVANTAGES
- Allows to introduce a large quantity of filler
- Easier mixing and casting
- Very good hardened resin strength parameters
POLIMAL 109-38 RPyK
Double accelerated orthophthalic resin. The product meets all necessary hygienic requirements — National Institute of Hygiene's approval HK/B/0502/02/2010.
APPLICATION
Manufacture of marble-like products and polyester and glass laminates used in households, construction and other branches of the industry.
PRODUCT ADVANTAGES
- Allows to introduce a large quantity of filler
- Easier mixing and casting
- Very good hardened resin strength parameters
Polimal 101-37 B
Medium flexible orthophthalic resin with good durability that contains an amine accelerator.
APPLICATION
Manufacture of mastics and trowels.
PRODUCT ADVANTAGES
- High durability
- Amine accelerator
Polimal 109-59 B
Medium flexible orthophthalic resin with good durability and stability. Contains an amine accelerator.
APPLICATION
Manufacture of resin and mineral compositions hardened with benzene peroxide.
PRODUCT ADVANTAGES
- High durability
- Good stability
- Amine accelerator
Polimal 103 G and version GL
Medium flexible resins featuring a relatively mild hardening process. Their basic feature is high transparency and colour clarity. They are used in centrifugal casting.
APPLICATION
- Polimal 103 G — manufacture of buttons cut from a plate obtained in rotating drums.
- Polimal 103 GL — manufactured using metal tubes to cast rods, from which buttons are cut.
AVAILABLE VERSIONS
- Polimal 103G — low viscosity resin
- Polimal 103GL — high viscosity resin
PRODUCT ADVANTAGES
- Transparency
- Colour clarity
- Mild hardening process
Polimal 1808 LT
Medium flexible transparent resin, orthophthalic, thixotropic. Features a relatively mild hardening process.
APPLICATION
Manufacture of clothing accessories, coloured moulds and laminates.
PRODUCT ADVANTAGES
- Transparency
- Mild hardening process
Polimal 1809 U
Transparent resin in the form of uniform, viscous liquid with a characteristic odour.
APPLICATION
Manufacture of polyester and glass laminates.
PRODUCT ADVANTAGES
- High durability
- Transparency
Polimal 144 B
Terephthalic resin with good durability, containing an amine accelerator.
APPLICATION
Manufacture of resin cartridges (blasting cartridges).
PRODUCT ADVANTAGES
- Good miscibility and suspensibility of mineral fillers in resin
- High durability in comparison with DMA
- Good processing properties
- No need to add amine
Polimal 142
High viscosity terephthalic resin with increased heat resistance.
APPLICATION
Manufacture of polyester moulding compounds.
PRODUCT ADVANTAGES
- High heat resistance HDT 95°C
Polimal 127
Transparent NPG isophthalic-neopentyl resin with high resistance to ageing factors (weather conditions).
APPLICATION
Production of "solid surface" products (among others).
PRODUCT ADVANTAGES
- Very good mechanical and performance parameters
- It is pre-accelerated
- High efficiency
- Good processing properties
- Optimal curing properties
- Reinforced resistance to UV radiation
Polimal 1058
Medium-flexible DCPD construction resin. Neutral and low-viscosity
APPLICATION
Production (by resin transfer moulding, RTM) of glass-polyester laminates.
PRODUCT ADVANTAGES
- Very good processing properties
- Good impregnability of fibre glass
- Lower styrene emission in relation to standard orthophthalic resins
- Short post-curing time
- Good wettability of filling materials
- Very good strength parameters
- High thermal resistance (HDT)
Polimal 1058-1
Medium-flexible DCPD construction resin with extended gelation time. Neutral and low-viscosity.
APPLICATION
Production (by resin transfer moulding, RTM) of glass-polyester laminates.
PRODUCT ADVANTAGES
- Very good processing properties
- Good impregnability of fibre glass
- Lower styrene emission in relation to standard orthophthalic resins
- Short post-curing time
- Good wettability of filling materials
- Very good strength parameters
- High thermal resistance (HDT)